Category: Network-Tools/Misc-Networking-Tools

Bus Hound 5.04

Operation System: Windows All
License: Trial
Size: 820 KB
Date: 2006-05-31 21:10:20

---

Bus Hound is the first software bus analyzer that can capture I/O, protocol, and performance measurements. You can also send your own custom commands from a graphical interface. Because Bus Hound is a 100% software product, it is especially suited to inspecting host side protocol.

Here are some key features of "Bus Hound":
· Captures megabytes of I/O at a time. The capture depth can be set starting from 1K up to available system RAM in 1K increments.
· Use Smart Triggers to stop the capture process upon a high level condition such as "no media" or "not ready". You can also specify a text or hex data pattern to trigger on.
· Build and submit commands including bus and device resets. For SCSI and ATAPI devices, you can send CDB's. For IDE devices, you can send ATA task file commands. For USB devices, you can send control, bulk, interrupt, or isochronous transfers as well as simulate hot plug. For FireWire devices, asynchronous transfers can be performed. You can also access any device at the hardware I/O Port level. The data transfer results can be saved to a binary file.
· Capture device driver packets including IRP's, URB's, IRB's, SRB's, IOR's, and SCSI pass through.
· Merge repeated identical commands. Especially useful for compacting captures where a device is polled with the same command repeatedly.
· Display device properties such as the device serial number, hardware id, USB endpoints, bus power, bus speed, and FireWire node.
· Measures device performance. View individual read, write, and isochronous performance along with the total amount of data transferred of each.
· Display what device driver submitted each command.
· I/O from multiple devices can be captured simultaneously, even if devices are attached to different buses.
· There is no limit on how many machines can run the product in parallel.
· The system startup process can be captured, allowing capture of the very first commands sent to a device.
· In addition to command and data transfers, low-level protocol is captured such as operating system status and sense data. This information can be used to efficiently trouble shoot device driver or firmware issues.
· Microsecond resolution timing is captured. This allows the time between commands to be measured as well as the elapsed time of a single command.
· Captured data can be viewed in real time, dragged and dropped to other applications, or saved to a text or zip file.
· When the capture buffer fills to capacity, Bus Hound can be configured to stop the capture process or continue capturing, keeping the most recent acquired data.
· The capture depth of each individual I/O phase can be configured from 1 byte up to 2GB in 1-byte increments. For instance, if the capture depth is set to 8 bytes, only the first 8 bytes of each packet will be captured.
· Log the system date and time of when each phase occurred.
· A simple web-like interface. Devices are selected simply by placing a checkmark next to them in a graphical tree.


Limitations:
· It captures up to 32 commands
· It captures only the first 8 bytes of each data transfer

---

Download: Bus Hound 5.04

---

NFO(s) releases:

World:

---

CrackNews releases: